HMWPE

常見例句

• This method has the advantages of simple process,high productivity and low cost by comparison with gel spinning of HMWPE.
  此法比凝膠紡絲法工藝簡單，產率高，成本低。
• A kind of high strength and high modulus fiber was prepared by melt spinning and drawing of high molecular weight polyethylene (HMWPE) plasticized by wax.
  采用石蠟增塑高相對分子質量PE后紡絲并經高倍拉伸制備高強高模纖維。
• The air pouches were injected with 3 mL alumina particles suspension into the alumina particle group,while 3 mL HMWPE particles suspension was injected in the HMWPE particle group; the control group was given matching phosphate buffered saline.
  氧化鋁陶瓷磨損顆粒組向air-pouch內注射經超聲分散后的氧化鋁陶瓷磨損顆粒懸液3mL,高分子聚乙烯磨損顆粒組注射高分子聚乙烯磨損顆粒懸液3mL,模型對照組注射等量磷酸鹽緩沖鹽水。
• TUNEL result of apoptotic cells:TUNEL-positive cells were detected in the alumina particle group and HMWPE particle group,which were brown staining. No severe cellular reaction was found in the control group.
  凋亡細胞TUNEL原位檢測結果:氧化鋁陶瓷磨損顆粒組、高分子聚乙烯磨損顆粒組均存在TUNEL染色陽性細胞,細胞核著染成棕褐色或棕色,模型對照組未見明顯組織細胞反應。
• A kind of high strength and high modulus fibre was prepared by means of plasticized melt spinning of high molecular weight polyethylene(HMWPE) with wax blend and high stretch ratio.
  采用石蠟增塑高相對分子質量PE后紡絲并經高倍拉伸制備高強高模纖維。
• HDPE induced systems with HMWPE content of 2%, 6% and 10% respectively were used to prepare two-dimensional self-reinforced pipelines via a two-dimensional compound stress field die.
  將質量分?jǐn)?shù)分別為2%25、6%25和10%25的相對高分子量高密度聚乙烯(HMWPE)加入相對低分子量高密度聚乙烯(HDPE)中組成誘導體系,并通過雙向復合應力場擠管裝置制得了雙向自增強HDPE管材。
返回 HMWPE