arc

常見例句

用作名詞 (n.)

• The sun appears to move in an arc across the sky.
  太陽看起來在天空中以弧形運行。
• When the moon is new it looks like an arc of light in the sky.
  新月看起來像天空中的一盞弧形燈。

更多例句

• A group of actors are rehearsing a play about Joan of Arc.
  一群演員正在排演一出關于圣女貞德的戲。
• Joan of Arc was finally canonized by Pope Benedict XV in 1920.
  圣女貞德終于在1920年由教皇本尼狄克十五世封為圣徒。
• His pass described a perfect arc through the leaden sky.
  他的傳球在陰沉的天空中劃出了一道完美的弧線。
• the arc of a rainbow
  彩虹的弧形
• Joan of Arc was burnt at the stake .
  圣女貞德被處以火刑。
• The Aleutian chain is a long arc of islands in the North Pacific.
  阿留申群島是北太平洋上一長串呈弧形排列的小島。
• A group of actors are rehearsing a play about Joan of Arc.
  一群演員正在排演一出關于圣女貞德的戲。
• Joan of Arc was finally canonized by Pope Benedict XV in 1920.
  圣女貞德終于在1920年由教皇本尼狄克十五世封為圣徒。
• His pass described a perfect arc through the leaden sky.
  他的傳球在陰沉的天空中劃出了一道完美的弧線。
• The rainbow forms an arc in the sky.
  彩虹在天空中呈一個弧形.
• The sun appears to move in an arc across the sky.
  太陽看起來在天空中以弧形運行.
• The rainbow described an arc in the dark sky.
  彩虹在昏暗的天空劃出了一道圓弧.
• When the moon is new it looks like an arc of light in the sky.
  新月看起來像天空中的一盞弧形燈.
• Avenues radiate from the Arc de Triomphe in Paris.
  在巴黎,街道以凱旋門為中心向四方伸展.
• Joan of Arc was burnt ( alive ) at the stake.
  圣女貞德在火刑柱上被 ( 活活 ) 燒死.
• White aluminium oxide abrasive is electrically fused in an arc furnace processed alumina as raw material.
  白剛玉是以鋁氧粉為原料,在電弧爐內經高溫冶煉而成.
• It is also suitable for carbon arc gouging using up to 10 mm diameter carbon electrodes.
  即使使用直徑高達10毫米的碳棒進行碳弧氣刨,這款焊接電源也能應對自如.
• ZX 3、 ZXG & M sery DC arc welder are the DC welder that use silicon rectifier.
  ZX3、 ZXG 、M系列直流弧焊機是一種采用硅整流電路的焊接設備,本系列焊機與旋轉直流焊機相比,具有重量輕、噪聲、率高、明顯的節能效果.
• Deposition ZL 301 on ZM 5 magnesium alloy surface by high energy micro arc process was performed.
  使用高能微弧火花沉積機在ZM5鎂合金表面上沉積ZL301合金.
• Among familiar compensators , Thyristor controlled reactor ( TCR ) is suitable for compensating the arc furnace.
  晶閘管控制電抗器 ( TCR ) 以較好的解決電弧爐的無功補償問題.
• The definitions of welding pose parameters of arc welding robot were discussed.
  討論了弧焊機器人焊接位姿參數的定義.
• With arc starting and push current, effectively prevent welding rod sticking.
  具有引弧,推力電流, 有效防止焊條粘結.
• Please try the arc, and see what, and tell me.
  我沒試過你填入負的線寬是什么效果, 你試了告訴我一下.
• A microcomputernized control arc power source was analyzed and the developing trend was also dealt with.
  本文對微機控制的弧焊電源進行了分析和評價,對將來的發展進行了探討.
• The purification of single - walled carbon nanotubes ( SWNTs ) synthesized by a hydrogen arc - discharge method was investigated.
  針對半連續氫電弧法制備的 單壁納米碳管 提出了一種純化方法.
• May I see your ARC and passport please?
  我可以看你的工作證及護照 嗎 ?
• A perpendicular bisector of a chord passes through the centre and bisects the arc.
  弦的垂直平分線經過圓心,并且平分弦所對的兩條弧.
• The arc lamp is very useful in movie shooting, and screening.
  弧光燈在電影拍攝和放映的過程中有很大的用處.
• Often used standard light source is synchrotron radiation source and wall stabilized argon arc source.
  常用的光源標準如同步輻射光源和壁穩亞弧光源等.
• The makeup of the arc light sensor, physical model arc light sensing and signal characteristics, discussed.
  介紹了弧光傳感器的組成 、 物理模型及信號特征.
• A new topic was raised for research on effect ofinterference sources such as welding arc.
  提出了研究如電焊弧光之類干擾源的影響及防護的問題.
• When the arc short circuit happens, this way can also give fast protection.
  在線路發生弧光短路時, 也能快速實現保護.
• No colour fade after 300 hours close distant exposure to arc lamps.
  以炭精弧光燈近距離照射300小時,油漆沒有褪色.
• Besides ordinary electric lamps, arc lamps , fluorescent lamps and neon lamps also widely used.
  除了普通的電燈之外, 弧光燈 、 日光燈以及霓虹燈也都廣泛應用.
• With the increase of used cable lines, the problem of arc grounding overvoltage is more prominent.
  隨著配電網中采用的電纜線路的增多, 弧光接地過電壓問題日益突出.
• White aluminium oxide abrasive is electrically fused in an arc furnace processed alumina as raw material.
  白剛玉是以鋁氧粉為原料,在電弧爐內經高溫冶煉而成.
• Among familiar compensators , Thyristor controlled reactor ( TCR ) is suitable for compensating the arc furnace.
  晶閘管控制電抗器 ( TCR ) 以較好的解決電弧爐的無功補償問題.
• It is electrical fused in an arc furnace from aluminium oxide as raw material.
  以三水型和一水型鋁巖土為原料經電弧爐高溫冶煉冷卻加工而成.
• The most wear form is adhesive wear, arc erosion and plastic deformation.
  粘著磨損 、 電弧侵蝕、塑性變形是其主要的磨損形式.
• As a new method to improve the quality of arc spraying, arc ultrasonic is introduced spraying.
  提出用電弧超聲方法作為改善噴涂涂層質量的新方法.
• Stable arc, less spatter and deep penetrationcan ensure welding quality well.
  電弧穩定, 飛濺較少和熔透深,可確保焊接質量良好.
• The methods for preparing carbon nanotubes including electric arc, pyrolysis and decomposition, and flame, etc.
  全面介紹碳納米管的制備方法,包括電弧法 、 熱解法 、 火焰法等.
• Several theories about reigniting and extinguishing of the arc have been referred.
  本文綜合考慮了幾種電弧重燃和熄滅理論.
• The arc physical characteristic of mixed gases ( Ar + He + CO 2 ) and its on weld shaping were discussed.
  采用鎢極氬弧焊對不同比例 氬 -氦-二氧化碳混合氣體的電弧物理特性及其焊縫成形進行了實驗.
• Electric arc burns stability, remove tungsten consumption and assuring welding quality the workpiece cleaning function.
  電弧燃燒穩定, 利于各種工件的清理效果,減少鎢極損耗,保證了焊接質量.
• The dissociation of the water vapor in arc and energy absorbed by dissociating reaction are analyzed.
  對水蒸氣保護下電弧焊熔池中氫的吸入機理進行了探討.
• A method of hollow cathode arc welding technology is presented. In detail.
  詳細介紹了空心陰極穿透電弧焊接工藝方法.
• Its very important to control the electrode current of arc furnace.
  在冶煉工業的電弧爐中有效地控制電極電流,對于電弧爐正常運行至關重要.
• SCR rectifier is the same as that of DC arc wilding generator.
  從而使可控硅整流焊機的電弧穿透力與直流旋轉焊機相當.
• Induction furnace, electric arc furnace, melting steel and iron.
  感應爐 、 電弧爐 、 熔化鋼、鐵等.
• The stick of carbon is often used in an electric arc lamp.
  碳精棒常用于電弧燈.
• Wide matching scope of welding parameters, soft arc, high frequency drop transition, high productivity.
  焊接參數匹配寬, 電弧柔和, 熔滴過渡頻率高, 生產效率高.
• It is electrical fused in an arc furnace from aluminum oxide as raw material.
  以三水型和一水型鋁攀土為原料經電弧爐高溫冶煉冷卻加工而成.
• Foam slag takes an important role in the melting and oxidizing period of arc furnace.
  泡沫渣在電弧爐熔氧期有非常重要的作用.
• Atomization is very important in arc spraying, as the coating quality depends greatly on atomization.
  霧化在電弧噴涂中具有重要的作用, 涂層質量很大程度上取決于霧化效果.
• It has stable arc combustion, good slag detachability and a good a appearance of weld.
  電弧燃燒穩定, 脫渣容易,焊縫成型美觀.
返回 arc