sheet resistance

基本解釋

Of all these factors, the implantation dose has the most significant influence on mobility and sheet resistance.
在這些關系中，注入劑量對遷移率及薄層電阻有最主要的影響。
The initial experiments on and analysis of sheet resistance, contact, photomask alignment, line width, and correlations between device parameters and dopants have been made.
對薄層電阻、接觸、光掩模對準、線條寬度、器件參數與摻雜的相關性等內容進行了初步試驗和分析。
In this article, we drive the equations of measuring resistivity and surface sheet resistance, taking into account the contact dimension and putting the location of the four probes arbitrary.
本文考慮到接觸面積大小的影響，并讓四根探針排列成任意形狀，導出了測量電阻率和薄層電阻的關系式。

方塊電阻
方電阻
The minimum of sheet resistance is about 110 Ω,the minimum specific resistance of can reach 1.65 X 10-2 Ω·cm.
經5次鍍膜后的ITO薄膜方電阻可達110Ω／，電阻率為1.65×10-2Ω·cm。
方阻
Sheet resistance, transmittance and refractive index were as function of IR irradiation temperature （TIR）.
濺射時紅外輻射溫度TIR對薄膜方阻、薄膜透射率和折射率有重要影響。
薄層電阻
片電阻
薄片電阻

薄層電阻
In this paper,the circuit used for testing sheet resistance is designed using single chip processor.
本文還利用單片機系統設計了薄層電阻測試電路，對于程序中用到的范德堡隱函數，利用非線性反演和規范化擬合的方法推導出其多項式顯函數形式。
表單電阻