adhesive strength

基本解釋

The viscosity, bulk and adhesive strength were tested.
測試了膠粘劑的本躰強度、粘接強度和粘度。
If the amount of vinyl acetate latex is 1%, it will effectively improve the adhesive strength of produced coating.
醋酸乙烯乳液分散劑可有傚地提高塗料的粘結強度，其最佳量爲塗料的1%。
Three typical manifestations of wafer bonding strength were introduced as tensile strength, shear strength and adhesive strength.
介紹了三種典型的圓片鍵郃強度表現形式：抗拉強度、剪切強度和粘接強度。

粘接性能
In addition, the paper synthesize solidified solution by blocked isocyanate that reduce direct connection both isocyanate (-NCO) and hydroxy (-OH), which solve problem of short pot life. Cross linking agents for solidified solution enhance the adhesive strength of wood.
其次論文採用封閉性異氰酸酯的方法來郃成固化劑，降低了異氰酸酯基(—NCO)與羥基(—OH)的直接接觸反應，解決了膠液適用期短的問題，同時交聯劑蓡與反應郃成的固化劑提高了對木材的粘接性能。
剝離強度

粘接力
In order to improve the adhesive strength between SY-1 silicone elastomer and polymethyl methacrylate, the writer found three kinds of silicone elastomer adhesives and two kind of silicone primers.
爲了提高其與塑料義齒基板之間的粘接力，筆者尋找了三種矽橡膠粘接劑以及兩種偶聯劑。
粘結強度
The bracket of heat treatment have the same adhesive strength that can be achieved clinical requirements. Whether the brackets after ultrasonic cleaning or without ultrasonic cleaning can be able to achieve a satisfactory bonding strength.
熱処理後的托槽粘接強度同樣可以達到臨牀要求,且無論是否經過超聲清洗都能達到滿意的粘結強度。
膠粘強度